The Proper Way to Start Cutting Material with a Circular Saw

What is the correct way to start cutting material with a circular saw?

a. Power up the saw to full speed then slowly move it forward into the material

b. Hold the lower blade guard up to position the blade on the cut mark

c. Press the blade against the material being cut and set the saw rpm to Low

d. Tilt the front edge of the baseplate upward and push the saw forward

Answer

To start cutting material with a circular saw, hold the lower blade guard up to position the blade on the cut mark. Power up the saw to full speed and slowly move it forward into the material.

The proper way to start cutting material with a circular saw is to hold the lower blade guard up to position the blade on the cut mark. This ensures that the blade is aligned correctly before starting the saw. Then, power up the saw to full speed before slowly moving it forward into the material. This helps to prevent the blade from binding or getting stuck.

Starting the cut in this way also helps to maintain control over the saw, reducing the risk of kickback or other accidents. By following this method, you can achieve clean and precise cuts while ensuring your safety.

Remember to always wear appropriate safety gear, such as safety goggles and ear protection, when using power tools like circular saws. Prioritize safety and take your time to set up the cut properly to avoid any mishaps.